On the “Auto-Switcher” page, the user may set
adjustmensts for the Auto-Switcher function,
including a hotkey combination that quickly enables/disables the function.
Auto-Switching
Profiles on the Targets. This option box
enables/disables the Auto-Switching of Profiles for Targets. With this option checked, the program will
automatically change the Profile, depending what Target the mouse pointer or
text caret are over.
Note that Profiles may still be manually
selected for Targets even when this option is unchecked.
Check
Targets Interval. With this option, it is possibe to set how frequently
Auto-Switcher will check to see what Target is under the cursor or caret. If the value is too small, then the program
checks the mouse location so often that the Glass may lag. If the value is too large, the Glass seems to
react very slowly to change. The default value of 0.3 seconds. This means that the program will check the
mouse location about 3 times per second.
A value of 3.0 would mean that the program will only check the Target
under the mouse once every 3 seconds.
HotKey
for “Auto-Switch” Toggle . This setting
assigns the HotKey combination for easily enabling/disabling the Auto-Switcher. Simply click in the box and type in the key
combination that you wish to use for toggling this feature on and off. Remember to use a combination that does not
conflict with other Windows-defined or user-defined key combinations. Any combination will work, here -- even
something odd such as “Ctrl + A +
Note that Magnifier icon on the taskbar shows a small “A”
when Auto-Switcher is active.